Maintenance Schedule for Severe Conditions Honda Civic 2004 : Engine.

0

Filed Under (Honda) by admin on 29-12-2013

Download
30,000 miles/ 48,000 km/ — Service at the indicated distance or time, whichever comes first. Use this schedule if the vehicle is driven MAINLY in Canada or in any of the following conditions; if only OCCASIONALLY driven in these conditions, use the Normal Conditions schedule. Severe Driving Conditions Driving less than 5 miles (8 km) per trip in freezing temperatures, or driving less than 10 miles (16 km) per trip. Driving in extremely hot (over 90 ºF/32 ºC) conditions. Extensive idling, or long periods of stop-and-go driving, such as a taxi or a commercial delivery vehicle. Driving on muddy, dusty, or de-iced roads. Trailer towing, driving with a roof rack, or driving in mountainous conditions. Severe Driving Conditions Driving less than 5 miles (8 km) per trip in freezing temperatures, or driving less than 10 miles (16 km) per trip. Driving in extremely hot (over 90 ºF/32 ºC) conditions. Extensive idling or long periods of stop-and-go driving, such as a taxi or a commercial delivery vehicle. Driving on muddy, dusty, or de-iced roads. Trailer towing, driving with a roof rack, or driving in mountainous conditions. Do the items in parts A, B, C, D, E, F, G, H, I, and J as required for the mileage/time interval listed. NOTE: According to state and federal regulations, failure to do the maintenance items marked with an asterisk (*) will not void the customer’s emissions warranties. However, Honda recommends that all maintenance services be done at the recommended intervals to ensure long-term reliability. Replace engine oil, every 5,000 miles (8,000 km) or 6 months. Engine oil capacity-D17A1 engine without oil filter: 3.0 L (3.2 US qt), D17A2 and D17A6 engines without oil filter: 3.3 L (3.5 US qt). Replace engine oil filter, every 10,000 miles (16,000 km) or 1 year. Engine oil capacity-D17A1 engine with oil filter: 3.2 L (3.4 US qt), D17A2 and D17A6 engines with oil filter: 3.5 L (3.7 US qt). Check front and rear brakes, every 10,000 miles (16,000 km) or 1 year. Check pads and discs for wear (thickness), damage, and cracks. Check calipers for damage, leaks, and tightness of mount bolts. Check wheel cylinders for leaks. Check brake linings for cracking, glazing, wear, or contamination. Lubricate all hinges, locks, and latches, every 10,000 miles (16,000 km) or 1 year. Rotate tires, and check tire inflation and condition, every 10,000 miles (16,000 km). Follow the pattern shown in the Owner’s Manual. Inspect tie rod ends, steering gearbox, and gearbox boots, every 10,000 miles (16,000 km) or 1 year.

Maintenance Schedule for Severe Conditions Honda Civic 2004 :- Instructions.

0

Filed Under (Honda) by admin on 27-12-2013

Download
30,000 miles/ 48,000 km/ — Service at the indicated distance or time, whichever comes first. Use this schedule if the vehicle is driven MAINLY in Canada or in any of the following conditions; if only OCCASIONALLY driven in these conditions, use the Normal Conditions schedule. Severe Driving Conditions Driving less than 5 miles (8 km) per trip in freezing temperatures, or driving less than 10 miles (16 km) per trip. Driving in extremely hot (over 90 ºF/32 ºC) conditions. Extensive idling, or long periods of stop-and-go driving, such as a taxi or a commercial delivery vehicle. Driving on muddy, dusty, or de-iced roads. Trailer towing, driving with a roof rack, or driving in mountainous conditions. Severe Driving Conditions Driving less than 5 miles (8 km) per trip in freezing temperatures, or driving less than 10 miles (16 km) per trip. Driving in extremely hot (over 90 ºF/32 ºC) conditions. Extensive idling or long periods of stop-and-go driving, such as a taxi or a commercial delivery vehicle. Driving on muddy, dusty, or de-iced roads. Trailer towing, driving with a roof rack, or driving in mountainous conditions. Do the items in parts A, B, C, D, E, F, G, H, I, and J as required for the mileage/time interval listed. NOTE: According to state and federal regulations, failure to do the maintenance items marked with an asterisk (*) will not void the customer’s emissions warranties. However, Honda recommends that all maintenance services be done at the recommended intervals to ensure long-term reliability. Replace engine oil, every 5,000 miles (8,000 km) or 6 months. Engine oil capacity-D17A1 engine without oil filter: 3.0 L (3.2 US qt), D17A2 and D17A6 engines without oil filter: 3.3 L (3.5 US qt). Replace engine oil filter, every 10,000 miles (16,000 km) or 1 year. Engine oil capacity-D17A1 engine with oil filter: 3.2 L (3.4 US qt), D17A2 and D17A6 engines with oil filter: 3.5 L (3.7 US qt). Check front and rear brakes, every 10,000 miles (16,000 km) or 1 year. Check pads and discs for wear (thickness), damage, and cracks. Check calipers for damage, leaks, and tightness of mount bolts. Check wheel cylinders for leaks. Check brake linings for cracking, glazing, wear, or contamination. Lubricate all hinges, locks, and latches, every 10,000 miles (16,000 km) or 1 year. Rotate tires, and check tire inflation and condition, every 10,000 miles (16,000 km). Follow the pattern shown in the Owner’s Manual. Inspect tie rod ends, steering gearbox, and gearbox boots, every 10,000 miles (16,000 km) or 1 year.

How To Install Crossbar Toyota Highlander 2008 : Installation.

0

Filed Under (Toyota) by admin on 25-04-2012

Download
1. Remove Roof Rack Leg Covers (a) Remove the rear right roof rack leg cover. (Fig 1-1) (b) Repeat the removal for the rear left side. NOTE: The roof rack leg cover clips are easily damaged when removed and will require replacement when damaged. Part number can be found on page 1 “Vehicle Service Parts”. 2. Crossbar Installation (a) Loosen the knobs on each crossbar joint. (Fig. 2-1) (b) Ensuring that the arrow on the crossbar joint is facing toward the front of the vehicle, slide crossbar joints into left and right roof channels. (Fig. 2-2) Note: Wind noise may be generated if the crossbars are installed with the arrow pointing rearward. 3. Crossbar Alignment (a) Position front and rear crossbars so that they are parallel (A=A’, B=B’). (Fig. 3-1) (b) Securely tighten the knobs. 4. Roof Rack Leg Cover Installation (a) Position the tab at the front of the right rear cover into the guide on the leg. Then align rear clip. (Fig. 4-1) (b) Press outer clip to engage to leg. (c) Press inner clip to engage to leg. (d) Repeat for the left rear cover. (e) Confirm that the cover is installed securely. 5. Stopper Installation (a) Install the stopper with the angled portion against the leg cover by pressing the stopper into the groove for the LH side. (Fig. 5-1) (b) Repeat for the RH stopper.

Incoming search terms:

rubber trim on roof of toyota highlander,how do you installa roof drip clip for 2012 highlander,what are the rubber gaskets for on the roof of the toyota highlander for,reset highlander maintenance light 2013,algo-charter_if,remove honda pilot end caps,REPLACE AIR BAG SPIRAL CABLE IN 2013 TOYOTA HIGHLANDER,roof rack end caps 2008 highlander,section frame rail on toyota highlander,2003 toyota highlander oem luggage rack crossbar knobs,section rails 2006 toyota highlander,TORQUE SPECS ON REAR SUSPENCION CROSSMEMBER FOR 2006 TOYOTA HIGHLANDER,Toyota highland frame rail repair,underbody trim panels 2011 highlander,Rav4 roof rack removed,rav4 crossbar parts manual,p1656 toyota highlander,2003 toyota hilander transaxle fluid plug bolt,2008 toyota highlander cross bar installation,2011 toyota highlander underbody trim panals,2014 highlander roof crossbar installation instructions,clip for toyota highlander rubber roof strip,how i install crossbar on toyota highlander with video clips,How to install a glove compartment damper in a 2009 Toyota Venza?,how to remove crossbars from rav4 roof rack,how to repair toyota camry strip on the roof,installing roof rack crossbars toyota highlander,installing roof rack toyota highlander,where to section lt frame rail on toyota highlander

Page optimized by WP Minify WordPress Plugin